Showing posts with label Snow stops. Show all posts
Showing posts with label Snow stops. Show all posts

Wednesday, July 22, 2015

S-5! ColorGard Calculator

The S-5!® ColorGard® snow retention system is the best on the market when it comes to holding snow on metal roof systems.

The problem is knowing how much ColorGard® and components are needed to make a complete system; in the past a trained snow retention specialist was your best option. (We are factory trained. If you need our expertise, call us at 770-405-1060 or email us at tech@rapidmaterials.com)

Now you can calculate your ColorGard® snow retention requirements yourself with our easy to use online ColorGard® Calculator.

In order to use the ColorGard® Calculator, you will need the following information at hand:
  • Roof Panel Info
    • Brand name or style (we can help with this)
    • Material: Aluminum, zinc, copper, steel (galvalume or galvanized)
    • Gauge or thickness of material
    • Width of roof panel (dimension from panel rib to panel rib)
    • Height of panel ribs
  • Length of assembly
    • Length of the eave of each roof area to be protected by snow retention (If you have a straight gable roof and you want snow retention on both sides, you would have two assemblies
  • Length of roof panels.
    • You don't need the length of each panel, just the length of the longest panel for each roof area to be protected
  • Vertical Snow Load
    • This should be the "Roof Design Snow Load".
    • Because many existing structures (and new ones) do not have this data, a good starting point is to find the ground snow load for your location. The ICC (International Code Council) has a snow load chart available.
    • You can also contact your local municipality's building codes department and they should be able to provide you with at least the ground snow load.
    • It is important to note that ground snow load does not necessarily equate to roof snow loads, and certainly not roof design snow loads. The purpose of having this information is to determine the appropriate amount of snow retention devices to keep the snow retention device from separating from the roof and/or allowing the snow to slide. It does not determine the ability of the roof structure to support the snow load. When in doubt, it is always recommended that a structural engineer be consulted to determine if the structure is sufficient to support the load requirements.
  • Roof Slope
    • This is the roof slope in "pitch". This is given as feet of vertical rise in 12 feet measured horizontally. (or inches of rise for 12" of horizontal run)
http://www.s-5.com/rapid

As always, call or email us with any questions. 770-405-1060 M-F 8am-5pm. tech@rapidmaterials

Monday, June 29, 2015

The Real Cost of Snow Retention (Snow Guards)

Snow retention is a phrase that gets tossed around in construction and remodeling from time to time. Its a pretty simple concept: a device of some sort is mounted on a roof top to "retain" snow and keep it from sliding off of the roof.
Why go to all of the trouble and expense? Its just snow, right. Light, fluffy stuff?
Well, according to someone measures things like that for a living, the average snowflake weighs in at 0.00042 grams. That's about 0.0000148oz. In other words, it would take 270,270 snowflakes to weigh about as much as the all-beef patty on a McDonald's cheeseburger.
However. (This is a big word when used at the right time)
One cubic foot of snow loosely packed weighs about 15 pounds. Compacted it can weigh 20 pounds or more.
Think about this, a 12" wide, by 12" long by 12" thick slice of snow weighs as much as the average bowling ball. Even more.
Imagine a bowling ball being dropped 10 feet from your roof top and landing on something soft, like your dog or cat. Yuck. Well, fortunately snow tends to break apart a bit when it lands on something, but on the other hand, it also sticks together very well as it begins to slide off of your roof.
Lets put it into perspective. The average American ranch style house has about 3,000 square feet of roof area. lets say for argument's sake the roof in our discussion is a straight gable roof, so we can say half of the roof slopes to one side of the house, and half to the other.
So 1,500 square feet of roof per side. Now add a nice 6" blanket of snow all over than 1,500 square feet of roof. What do you have?
If the snow on your roof is nice and fluffy, you have a mass of snow that weighs 11,250lbs. Which can start sliding at any time. Of course your gutters will stop it from sliding, right? Oh yeah, don't forget about the plumbing vent pipes that sprout out of the roof. They'll help hold it too!
OK, so lets talk about the real cost of snow retention.

The REAL COST of Snow Retention is Not Having Any!

No, your gutters won't hold back the snow if it starts sliding. If you're lucky the damage will only be localized, but in most cases, you're going to have to have your gutters replaced the next spring.
Vent pipes? Eh. These days most are PVC. Which is brittle when cold. Which breaks under loads while cold. Call a plumber. And a roofer to replace the flashing after the plumber is done.
Car parked under the eave of the roof? Uh oh. I wonder if your auto insurance is going to cover the damage caused by an 800 pound chunk of snow falling on your car. Probably not. But the good news is that your homeowners insurance will pay if the snow sliding off of your roof damages your visitor's car. Hopefully nothing will slide off while the Christmas carolers are singing on your front steps. Or the postman is putting your mail through the door-slot. Or...well, you get the idea.

The Good News!

The good news is that you can do something to prevent all of these things from happening. By the way,metal roofing is not the only type of roofing susceptible to snow slide. This can happen on any type of roofing material or any roof. Even more so in northern climates where roofs are steeper. Note that the reason roofs are built steeper in snow country is not so the snow slides off easier, its because its structurally more resistant to heavy snow loads that remain on the roof!
The most important thing you can do is be proactive. Install a snow retention system during the warm dry months. Don't wait until snow is falling!

System Costs.

Depending on the type of snow guard or snow retention system you select, the cost can vary, but usually averages between $7.50 and $15.00 per foot. A premium 3 rail system such as the Syca ornamental snow guards may cost better than $30 per foot, but is ideal for short runs over doorways.
An S-5! Colorgard® system (designed specifically for metal roofs) is pretty darn reasonably. The average cost per foot for residential size projects using this system is around $10.50 per foot (materials only).
Both of these systems are easily installed using common hand-tools, look good and perform great.

How Do You Get Help Deciding What System to Use?

If you have a metal roof and are interested in the Colorgard® system you can use our online system finder to see what parts you will need. We suggest you contact us for assistance in determining the required quantities of parts; we can quickly and easily calculate and price complete systems (including volume discounts) for you in just a few minutes.
For any snow retention snow guard system, we can help. We can explain all of the options. We can tell you what tools you will need and how to install each and every system we sell.
Call us at 770-405-1060, Monday through Friday, 8am to 5pm. If we don't answer the phone, we're helping other customers, so leave a message and you will get a call back, usually within the hour. You can also email us at info@rapidmaterials.com.